ISO 216

src: ds055uzetaobb.cloudfront.net

ISO 216 specifies international standard (ISO) paper sizes used in most countries in the world today, although not in Canada, the United States, Mexico, Colombia, or the Dominican Republic. The standard defines the "A" and "B" series of paper sizes, including A4, the most commonly available size. Two supplementary standards, ISO 217 and ISO 269, define related paper sizes; the ISO 269 "C" series is commonly listed alongside the A and B sizes.

All ISO 216, ISO 217 and ISO 269 paper sizes (except some envelopes) have the same aspect ratio, ?2:1, within rounding to millimetres. This ratio has the unique property that when cut or folded in half widthways, the halves also have the same aspect ratio. Each ISO paper size is one half of the area of the next larger size in the same series.

Video ISO 216

Dimensions of A, B and C Series

Maps ISO 216

History

In 1786, the German scientist Georg Christoph Lichtenberg described the advantages of basing a paper size on an aspect ratio of ?2 in a letter to Johann Beckmann. The formats that became ISO paper sizes A2, A3, B3, B4, and B5 were developed in France. They were listed in a 1798 law on taxation of publications that was based in part on page sizes.

The main advantage of this system is its scaling. Rectangular paper with an aspect ratio of ?2 has the unique property that, when cut or folded in half midway between its shorter sides, each half has the same ?2 aspect ratio and half the area of the whole sheet before it was divided. Equivalently, if one lays two same-sized sheets paper with an aspect ratio of ?2 side-by-side along their longer side, they form a larger rectangle with the aspect ratio of ?2 and double the area of each individual sheet.

The ISO system of paper sizes exploit these properties of the ?2 aspect ratio. In each series of sizes (for example, series A), the largest size is numbered 0 (for example, A0), and each successive size (for example, A1, A2, etc.) has half the area of the preceding sheet and can be cut by halving the length of the preceding size sheet. The new measurement is rounded down to the nearest millimetre. A folded brochure can be made by using a sheet of the next larger size (for example, an A4 sheet is folded in half to make a brochure with size A5 pages. An office photocopier or printer can be designed to reduce a page from A4 to A5 or to enlarge a page from A4 to A3. Similarly, two sheets of A4 can be scaled down to fit one A4 sheet without excess empty paper.

This system also simplifies calculating the weight of paper. Under ISO 536, paper's grammage is defined as a sheet's weight in grams (g) per area in square metres (abbreviated g/m² or gsm). Since an A0 sheet has an area of 1 m², its weight in grams is the same as its grammage. One can derive the grammage of other sizes by arithmetic division in g/m². A standard A4 sheet made from 80 g/m² paper weighs 5 g, as it is 1/16 (four halvings, ignoring rounding) of an A0 page. Thus the weight, and the associated postage rate, can be easily approximated by counting the number of sheets used.

ISO 216 and its related standards were first published between 1975 and 1995:

• ISO 216:2007, defining the A and B series of paper sizes
• ISO 269:1985, defining the C series for envelopes
• ISO 217:2013, defining the RA and SRA series of raw ("untrimmed") paper sizes

src: previews.123rf.com

A series

Paper in the A series format has an aspect ratio of ?2 (? 1.414, when ignoring rounding). A0 is defined so that it has an area of 1 square metre before rounding to the nearest millimeter. Successive paper sizes in the series (A1, A2, A3, etc.) are defined by halving the length of the preceding paper size and rounding down, so that the long side of A(n+1) is the same length as the short side of An. Hence, each next size is roughly half of the prior size. So, an A1 page can fit 2 A2 pages inside the same area.

The most used of this series is the size A4, which is 210 mm × 297 mm (8.27 in × 11.7 in) and thus almost exactly 1/16 square metres in area. For comparison, the letter paper size commonly used in North America (8 ¹/₂ in × 11 in, 216 mm × 279 mm) is about 6 mm (0.24 in) wider and 18 mm (0.71 in) shorter than A4. Then, the size of A5 paper is half of A4, as 148 x 210 mm (5.8 x 8.3 in).

The geometric rationale behind the square root of 2 is to maintain the aspect ratio of each subsequent rectangle after cutting or folding an A-series sheet in half, perpendicular to the larger side. Given a rectangle with a longer side, x, and a shorter side, y, ensuring that its aspect ratio, x/y, will be the same as that of a rectangle half its size, y/x/2, which means that x/y = y/x/2, which reduces to x/y = ?2; in other words, an aspect ratio of 1:?2.

The formula that gives the larger border of the paper size An in metres and without rounding off is the geometric sequence:

${\displaystyle a_{n}=2^{{\frac {1}{4}}-{\frac {n}{2}}}.}$

The paper size An thus has the dimension

${\displaystyle a_{n}\times a_{n+1}}$

and area (before rounding)

${\displaystyle 2^{-n}~\mathrm {m} ^{2}.}$

The measurement in millimetres of the long side of An can be calculated as

${\displaystyle l=\left\lfloor \,{\frac {1000}{\,2^{\frac {2n-1}{4}}\,}}+0.2\,\right\rfloor }$

(brackets represent the floor function).

src: us.123rf.com

B series

The B series is defined in the standard as follows: "A subsidiary series of sizes is obtained by placing the geometrical means between adjacent sizes of the A series in sequence." The use of the geometric mean makes each step in size: B0, A0, B1, A1, B2 ... smaller than the previous one by the same factor. As with the A series, the lengths of the B series have the ratio ?2, and folding one in half (and rounding down to the nearest millimeter) gives the next in the series. The shorter side of B0 is exactly 1 metre.

The measurement in millimetres of the long side of Bn can be calculated as

${\displaystyle l=\left\lfloor \,{\frac {1000}{\,2^{\frac {n-1}{2}}\,}}+0.2\,\right\rfloor .}$

There is also an incompatible Japanese B series which the JIS defines to have 1.5 times the area of the corresponding JIS A series (which is identical to the ISO A series). Thus, the lengths of JIS B series paper are ?1.5 ? 1.22 times those of A-series paper. By comparison, the lengths of ISO B series paper are ⁴?2 ? 1.19 times those of A-series paper.

src: us.123rf.com

C series

The C series formats are geometric means between the B series and A series formats with the same number (e.g., C2 is the geometric mean between B2 and A2). The width to height ratio is ?2 as in the A and B series. The C series formats are used mainly for envelopes. An A4 page will fit into a C4 envelope. C series envelopes follow the same ratio principle as the A series pages. For example, if an A4 page is folded in half so that it is A5 in size, it will fit into a C5 envelope (which will be the same size as a C4 envelope folded in half). The lengths of ISO C series paper are therefore ⁸?2 ? 1.09 times those of A-series paper.

A, B, and C paper fit together as part of a geometric progression, with ratio of successive side lengths of ⁸?2, though there is no size half-way between Bn and A(n - 1): A4, C4, B4, "D4", A3, ...; there is such a D-series in the Swedish extensions to the system.

The measurement in millimetres of the long side of Cn can be calculated as

${\displaystyle l=\left\lfloor \,{\frac {1000}{\,2^{\frac {4n-3}{8}}\,}}+0.2\,\right\rfloor .}$

src: thumb9.shutterstock.com

Tolerances

The tolerances specified in the standard are:

• ±1.5 mm for dimensions up to 150 mm,
• ±2.0 mm for dimensions in the range 150 to 600 mm, and
• ±3.0 mm for dimensions above 600 mm.

These are related to comparison between series A, B and C.

src: us.123rf.com

Application

The ISO 216 formats are organized around the ratio 1:?2; two sheets next to each other together have the same ratio, sideways. In scaled photocopying, for example, two A4 sheets reduced to A5 size fit exactly onto one A4 sheet, and an A4 sheet in magnified size onto an A3 sheet; in each case, there is neither waste nor want.

The principal countries not generally using the ISO paper sizes are the United States and Canada, which use the Letter, Legal and Executive system. Although they have also officially adopted the ISO 216 paper format, Mexico, Panama, Venezuela, Colombia, the Philippines, and Chile also use mostly U.S. paper sizes.

Rectangular sheets of paper with the ratio 1:?2 are popular in paper folding, such as origami, where they are sometimes called "A4 rectangles" or "silver rectangles". In other contexts, the term "silver rectangle" can also refer to a rectangle in the proportion 1:(1 + ?2), known as the silver ratio.

src: us.123rf.com

Matching technical pen widths

An important adjunct to the ISO paper sizes, particularly the A series, are the technical drawing line widths specified in ISO 128, and the matching technical pen widths of 0.13, 0.18, 0.25, 0.35, 0.5, 0.7, 1.0, 1.40, and 2.0 mm, as specified in ISO 9175-1. Color codes are assigned to each size to facilitate easy recognition by the drafter. These sizes increase by a factor of ?2, so that particular pens can be used on particular sizes of paper, and then the next smaller or larger size can be used to continue the drawing after it has been reduced or enlarged, respectively. For example, a continuous thick line on A0 size paper shall be drawn with a 0.7 mm pen, the same line on A1 paper shall be drawn with a 0.5 mm pen, and finally on A2, A3, or A4 paper it shall be drawn with a 0.35 mm pen.

The earlier DIN 6775 standard upon which ISO 9175-1 is based also specified a term and symbol for easy identification of pens and drawing templates compatible with the standard, called Micronorm, which may still be found on some technical drafting equipment.

src: thumb7.shutterstock.com

See also

• ANSI/ASME Y14.1
• International standard envelope sizes
• ISO 128 (relating to technical drawing)
• Letter (paper size)
• Paper density
• Paper size

src: us.123rf.com

References

src: banner2.kisspng.com

External links

• International standard paper sizes: ISO 216 details and rationale
• ISO 216 at iso.org

Source of article : Wikipedia